Tysso Prp-300 Driver Download Verified Windows 10 ❲480p❳

To download and install the driver for the Tysso PRP-300 high-speed thermal receipt printer on Windows 10, follow the guide below. 1. Download the Driver The official driver is provided by FAMETECH INC. (the manufacturer of TYSSO). Official Download Link: Printer Driver for PRP-188/250/300/350 Alternative Source: For advanced label design and cloud printing, you can use Loftware's Free Tysso Printer Driver , which supports Windows applications. www.tysso.com.tw 2. Installation Steps for Windows 10 Follow these steps to ensure a successful setup: Preparation:

Ensure the printer is connected to your PC via USB, Serial, or Ethernet but keep it powered off initially. Run as Administrator: Locate the downloaded setup file (often named SetupPRP.exe PRPDRVEN.EXE ). Right-click the file and select "Run as administrator" to prevent permission issues. Select OS & Model:

Choose "Windows 10" (or the most recent version available in the installer) and select as the model. Interface Configuration:

Select your communication interface (USB, Serial, or TCP/IP). tysso prp-300 driver download windows 10

If using USB, the system will prompt you to turn the printer on. Once powered on, the driver installation should complete automatically. Verify Installation: Devices and Printers in your Control Panel.

The printer should appear as "PRP 300" or "THERMAL Receipt Printer". Right-click the printer, select Printer Properties , and click Print Test Page to verify it is working. img.pospartner.cz 3. Troubleshooting & Maintenance Port Settings: If the printer does not print, go to Printer Properties > Ports

and ensure the correct port (e.g., USB001 or the correct COM port) is selected. Cutter Reset: To download and install the driver for the

If the auto-cutter jams, turn the printer off and then back on; the cutter should automatically reset to its initial position. For detailed hardware setup, refer to the PRP-300 Instruction Manual Printer Driver of PRP-188 PRP-250 PRP-300 PRP-350 - tysso

Since TYSSO is a lesser-known brand (often rebranded thermal receipt printers), the content includes both official guidance and generic safe steps using built-in Windows drivers.

Installing OPOS for PRP-300

  1. Download OPOS Setup for PRP-300 (from TYSSO support).
  2. Run OPOS_Setup.exe as Admin.
  3. Select TYSSO PRP-300 → Choose USB.
  4. After installation, open OPOS Configuration Tool (Start menu).
  5. Click Add New Device → Select POSPrinter → Logical Name: TYSSO_1.
  6. In properties, set:
    • Device Name: PRP-300
    • Device Class: Microsoft POSPrinter
    • Port: USB001
  7. Click Test → A test receipt should print.

Troubleshooting OPOS:

  • Error "Device not claimed" → Run your POS software as Administrator.
  • No receipt printed → Check that CCO (Cash Change Output) is disabled; PRP-300 is receipt-only.

For Ethernet (Network):

  • Assign a static IP to the printer (check manual: default is 192.168.1.100).
  • In Windows → Add a printer → The printer I want isn't listed → Add a TCP/IP printer → Enter IP address → Select Custom → Use RAW protocol, Port 9100.

Option 1: The "Microsoft POS for .NET" Driver

  1. Enable Windows Features → Turn on Microsoft Point of Service (POS for .NET).
  2. Install OPOS (OLE for POS) common controls.
  3. Many POS software (like Loyverse, Square, Toast) automatically detect ESC/POS printers without a specific driver.

4. The Cash Drawer & OPOS Drivers (For Retail Systems)

If you are using a full POS system (like RMS, NCR Silver, or LS Retail), you need OPOS (OLE for POS) drivers, not just Windows print drivers.

Where to find OPOS for Tysso PRP-300:

  • Search for "Microsoft POS for .NET" (Free from Microsoft).
  • Search for "OPOS Common Controls" (Version 1.14 or newer).
  • Note: You will likely use the OPOS driver for Bixolon SRP-275 or Citizen CBM-820 as a substitute.