Upgrade Medianav 913 To 10131 May 2026

This guide is tailored specifically for Renault and Dacia vehicles (Sandero, Logan, Duster, Koleos, Captur, Fluence) equipped with the MediaNav tablet.

Troubleshooting Common Issues

Problem: The USB is not recognized.

  • Solution: Ensure the USB is formatted as FAT32. Try a different brand of USB stick; some older MediaNav units are pick

Updating MediaNav from 9.1.3 to 1.0.13.1: Hardware vs. Software

Upgrading from version 9.1.3 to version 1.0.13.1 is not a standard software update because these versions belong to two different hardware generations of the MediaNav system.

Version 9.1.3 is the final official firmware for the MediaNav Evolution (v1), which runs on the Windows CE operating system.

Version 1.0.13.1 is firmware for the newer MediaNav Evolution 2 (v2 or MN3), which runs on a Linux-based operating system.

Because the underlying operating systems and hardware (processor and RAM) differ, you cannot simply install version 1.0.13.1 onto a device currently running 9.1.3 via a USB update. The Path to 1.0.13.1: Hardware Replacement

To "upgrade" to version 1.0.13.1, you must physically replace your existing head unit with the newer Linux-based MediaNav Evolution 2 module. Hardware Compatibility: The newer units (often part number LAN5810WR0 Go to product viewer dialog for this item. upgrade medianav 913 to 10131

) physically fit into the dashboard slots of vehicles that use the older Evolution v1 units.

Key Benefits: Moving to the 1.0.13.x system provides native support for Apple CarPlay and Android Auto, which are not available on the 9.1.3 version.

Installation Note: Replacement units from third-party sellers or salvaged vehicles may need to be "coded" with your vehicle's VIN and specific configuration (like camera settings) to function correctly. Maintaining Your Current 9.1.3 System

If you choose to stay with your current hardware, version 9.1.3 is already the most advanced official software available for that device. You can still perform regular maintenance through official channels:

Direct software upgrades from MediaNav version 9.1.3 to 1.0.13.1 are generally not possible because they run on different hardware and operating systems. System Compatibility

The version number indicates the hardware generation of your unit:

MediaNav Evolution (Version 5.x to 9.1.3): These units run on Windows CE 6.0. 9.1.3 is considered the final official stable version for this hardware. This guide is tailored specifically for Renault and

MediaNav Evolution 2 / Late Model (Version 1.0.x): These units (typically 2019+ models) run on Linux and feature more powerful processors to support Android Auto and Apple CarPlay.

Because the architecture has changed from Windows to Linux, you cannot simply "flash" the 1.0.13.1 firmware onto a 9.1.3 device. Options for Your Unit (9.1.3)

Since you cannot jump to the Linux-based 1.0.13.1 software, you have two main paths:

Official Map Updates: You can still update the maps on your 9.1.3 system using the official MediaNav Evolution Toolbox. Insert a FAT32-formatted USB drive (min 4GB) into your car.

Go to Navigation > Options > Map Update > Update to create a "fingerprint" of your system.

Connect the USB to your PC and use the Renault Toolbox or Dacia Toolbox to download available content.

Custom Firmware (Third-Party): Many users install third-party add-ons like Menaco, which supports version 9.1.3. This can unlock features like alternative navigation apps (Navitel, 7ways) and video players without needing a hardware swap. Troubleshooting Common Issues Problem: The USB is not

Hardware Upgrade: To get the features of version 1.0.13.1 (like Android Auto), you would need to replace the physical head unit with the newer LG LAN5800WR0 (Linux-based) model.

To upgrade your Medianav 913 (firmware version 9.13) to 10131 (version 10.131), you need to follow a specific process because this is a major version jump.

Here are the key points for a proper feature (official update):

Step A – Prepare USB drive

  • FAT32 format, 8–16 GB (no larger than 32 GB recommended)
  • No other files on the drive

Summary

This guide explains how to upgrade a Renault/Nissan MediaNav (R-Link / MediaNav Evolution) from firmware 9.13 (913) to 10.13 (10131). It covers compatibility checks, required files and tools, step-by-step flashing, common problems, rollback, and warnings. Follow carefully — doing firmware updates carries risk of bricking the unit. Proceed only if comfortable with electronics and have backups.

Troubleshooting: What If It Fails?

  • "USB not recognized" error: Your USB drive is too fast (USB 3.0) or too large (>32GB). Retry with a cheap 8GB USB 2.0 drive.
  • "Error 0x0F" on green screen: The trk folder is missing or the file structure is wrong. Reformat and copy files again.
  • Screen stuck on boot logo (looping): Unplug the USB. Turn off the car. Lock the doors for 5 minutes (to force the CAN bus to sleep). Try again with a different USB drive.
  • Bricked unit (no lights, no sound): If the battery died during the flash, you need a professional. You can try the “CTM reset” (disconnect the car battery for 10 minutes), but usually, you will need to ship the unit to a repair service (e.g., SOS Dashboard in France or DIY-Dan in the UK) to re-flash the NAND chip via JTAG.

1. Check your current system

  • Medianav 913 = old firmware from around 2015–2016
  • 10131 = newer interface, better Bluetooth, USB music management, and navigation fixes

You cannot jump directly from 9.13 to 10.131 with a single file in many cases — intermediate updates may be required unless you have a special “direct upgrade” package (rare for official dealer tools).

Step‑by‑step upgrade procedure (typical, adapt per vendor instructions)

Note: Follow vendor-specific steps if they differ; below is a generalized actionable sequence.

  1. Place vehicle in safe mode:
    • Park with parking brake on. Keep engine running or connect external power.
  2. Prepare installation media:
    • Extract the firmware package if compressed.
    • Copy firmware file(s) to the root of the USB drive or SD card exactly as instructed (e.g., file name may need to be specific: update.bin).
    • Safely eject the media.
  3. Enter update mode:
    • Power cycle the Medianav unit and insert the media.
    • Use the unit’s firmware update menu (Settings → System → Update) or the hardware recovery key sequence (hold specific buttons during power-up) depending on model instructions.
  4. Start the flashing process:
    • Confirm prompts and begin the update. Do not remove power or media during flashing.
    • Expect progress indicators—do not interrupt until the procedure completes and the unit reboots.
  5. Post-flash initialization:
    • Allow the unit to complete first-boot tasks (could take several minutes).
    • Reboot the unit once more if prompted.
  6. Restore data and reconfigure:
    • Re-import navigation favorites/POIs and re-pair Bluetooth devices.
    • Re-apply any user preferences.
  7. Verify functionality:
    • Test core features: touchscreen responsiveness, audio playback (radio, USB, Bluetooth), navigation route planning and guidance, microphone/phone calls, steering-wheel controls, backup camera (if integrated), and any connected vehicle bus features (CAN/OBD-II interactions).
    • Check for new settings or changed behavior introduced by 10131 and confirm they are acceptable.

Step-by-Step Upgrade Process

Step 4: The Upgrade Process (9.1.3 → 10.1.3)

  1. Insert the USB drive into the car’s USB port (usually in the center console or glovebox).
  2. Wait. Unlike a phone, the system does not pop up a “Do you want to update?” window.
    • After 10-30 seconds, the screen will go black.
    • Do not panic.
  3. The green screen appears. You will see a text-based bootloader with white text on a green or black background.
    • Text will read: Read USB..., Check image..., Erase FLASH....
    • This takes 2 minutes.
  4. The progress bar: The screen will switch to a grey background with a blue progress bar. It will move slowly from 0% to 100%.
    • Critical: If it stalls at 13% or 47% for more than 5 minutes, wait. The CPU is verifying data. Do not touch anything.
  5. The first reboot: When the bar hits 100%, the screen will flicker and go black for 10 seconds. The radio will click. This is normal.
  6. The second phase: A new progress bar appears, or the green text returns. This is writing the application layer. Another 5 minutes.
  7. Final reboot. The screen will flash twice, then go black.