Usb Xhci Compliant Host Controller Driver Windows 10 64 Bit -

The USB xHCI (eXtensible Host Controller Interface) Compliant Host Controller driver is a critical system component for Windows 10 that enables your PC to communicate with USB 3.0 and newer devices. While Windows 10 includes a native driver (Usbxhci.sys), issues such as the Code 10 error or "Device cannot start" frequently arise due to driver corruption, hardware conflicts, or outdated motherboard firmware. Core Functionality

Protocol Management: Translates data requests from the OS into signals for the physical USB ports.

Backwards Compatibility: Supports SuperSpeed (USB 3.0), High-Speed (USB 2.0), Full-Speed, and Low-Speed devices.

Native Integration: Unlike earlier Windows versions, Windows 10 typically does not require a separate third-party driver download because the Microsoft USB 3.0 driver stack is built into the system. Installation and Recovery Procedures

If your USB ports aren't working or you see a yellow exclamation mark in Device Manager, use these steps to reset the driver: 1. Automatic Driver Reinstallation Right-click Start and select Device Manager. Expand Universal Serial Bus controllers.

Right-click USB xHCI Compliant Host Controller and select Uninstall device.

Restart your PC. Windows will automatically reinstall the native driver upon reboot. 2. Update via Chipset Drivers

USB xHCI Compliant Host Controller Code 10 - Microsoft Learn

Here’s a clear, informative text you can use for a support page, driver download link, or forum post about the USB xHCI Compliant Host Controller driver on Windows 10 64-bit.

Title:
USB xHCI Compliant Host Controller Driver for Windows 10 (64-bit)

Description:
The USB xHCI (Extensible Host Controller Interface) driver is an essential system component that allows Windows 10 64-bit to communicate with USB 3.0, USB 3.1, and USB 3.2 ports. It ensures high-speed data transfer, proper power management, and compatibility with modern USB devices such as external drives, keyboards, mice, and docking stations.

Driver Status:
✅ Included natively in Windows 10 64-bit – No manual installation is typically required. The driver is automatically installed via Windows Update or the inbox driver set. usb xhci compliant host controller driver windows 10 64 bit

How to Check / Reinstall the Driver:

Press Win + X and select Device Manager.
Expand Universal Serial Bus controllers.
Look for USB xHCI Compliant Host Controller.

If the driver is missing or shows an error:

Option 1 (Recommended): Run Windows Update → View optional updates → Driver updates.
Option 2: In Device Manager, right-click the controller → Uninstall device → Restart your PC (Windows will reinstall the driver automatically).
Option 3: Download the latest Chipset Driver from your motherboard or laptop manufacturer (Intel, AMD, ASMedia, etc.).

Manual Driver Download (if needed):
For most systems, no separate download is required. If you must manually install:

Intel systems: Download “Intel Chipset Driver” or “Intel USB 3.0 eXtensible Host Controller Driver” from Intel’s official site.
AMD systems: Use AMD Chipset Drivers from AMD’s site.
Generic: Microsoft Update Catalog – search for “xHCI Host Controller.”

Common Issues & Fixes:

Error Code 10 / 39 / 43: Uninstall the device, restart, then scan for hardware changes.
USB ports stop working: Disable Fast Startup (Power Options → Choose what power buttons do).
Driver not loading: Run sfc /scannow and DISM /Online /Cleanup-Image /RestoreHealth in Command Prompt (Admin).

Note: Avoid third-party driver updaters claiming to fix xHCI issues. They often cause more problems than they solve.

The USB xHCI Compliant Host Controller is the primary driver that allows Windows 10 (64-bit) to communicate with USB 3.0, 3.1, and 3.2 hardware. Unlike older USB 2.0 (EHCI) controllers, the eXtensible Host Controller Interface (xHCI) is designed for high-speed data transfers and is backward compatible with legacy devices.

If your USB ports have stopped working, or you see a yellow exclamation mark in Device Manager with a "Code 10" or "Code 43" error, you likely have a driver conflict or corruption issue. Understanding the xHCI Driver

The xHCI driver acts as the bridge between your motherboard's hardware and the Windows operating system. On Windows 10, Microsoft typically includes a generic "USB xHCI Compliant Host Controller" driver that works for most systems automatically. However, specific hardware from manufacturers like Intel, AMD, or ASMedia may require dedicated chipset drivers for optimal performance. How to Update or Reinstall the Driver

If you are experiencing connectivity issues, follow these steps to refresh your driver: Use Device Manager: Right-click the Start button and select Device Manager. Expand the Universal Serial Bus controllers section.

Right-click USB xHCI Compliant Host Controller and select Update driver. Choose Search automatically for drivers. Force a Reinstallation:

If the update fails, right-click the controller and select Uninstall device. Title: USB xHCI Compliant Host Controller Driver for

Restart your computer. Windows 10 should automatically detect the hardware and reinstall the native driver upon reboot. Manufacturer Specific Drivers:

For laptops and pre-built PCs, visit official support pages such as Dell Support or HP Support to download the specific Intel USB 3.0 eXtensible Host Controller or Chipset driver for your model. Common Fixes for "Device Cannot Start" (Code 10)

If the driver is installed but the device won't start, try these troubleshooting methods:

Check Power Management: In Device Manager, right-click the controller, go to Properties, then the Power Management tab. Uncheck "Allow the computer to turn off this device to save power".

BIOS/UEFI Settings: Restart your PC and enter the BIOS. Ensure that USB 3.0 Support or xHCI Mode is set to Enabled.

Registry Modification: Some users resolve compatibility issues by disabling "USB Selective Suspend" in the Windows Power Options. Where to Download

For most users, Microsoft Update Catalog provides the safest repository for manual downloads if the automatic Windows Update service fails. Always avoid third-party "driver updater" sites which may package malware or incorrect versions.

Are you currently seeing a specific error code (like Code 10 or Code 43) in your Device Manager for this controller? USB xHCI Compliant Host Controller network drivers

Windows 10 (64-bit) typically includes the USB xHCI Compliant Host Controller driver as part of the operating system, meaning it should install or update automatically via Windows Update.

If you are experiencing issues like an "Error Code 10" or missing ports, use the following methods to reinstall or update the driver: 1. Automatic Reinstall via Device Manager This is the most reliable way to fix a corrupted driver: Press Windows Key + X and select Device Manager. Expand Universal Serial Bus controllers.

Right-click USB xHCI Compliant Host Controller and select Uninstall device. Press Win + X and select Device Manager

Restart your computer. Windows will automatically detect the hardware and reinstall the correct native driver during startup. 2. Update via Manufacturer Support

If the standard driver isn't working, you should download specific chipset or USB 3.0 drivers from your PC manufacturer's official support page:

Dell Users: Visit Dell Support and enter your Service Tag to find the Intel USB eXtensible Host Controller Driver or chipset updates.

HP Users: Go to the HP Software and Driver Downloads page and enter your serial number for the relevant host controller files.

Intel Users: Use the Intel Driver & Support Assistant to automatically scan for and install the latest USB 3.0/3.1 drivers. 3. Manual Update from Hardware ID

If you cannot find the driver, you can identify the exact hardware vendor:

In Device Manager, right-click the controller and select Properties.

Go to the Details tab and select Hardware Ids from the dropdown.

Copy the top string (e.g., PCI\VEN_8086&DEV_9D2F) and search for it on official vendor sites like Intel or AMD.

Are you seeing a specific error code (like Code 10 or Code 43) in Device Manager, or is a specific USB device failing to connect?

Method 1: Reinstall the driver (simplest)

Open Device Manager (devmgmt.msc).
Expand Universal Serial Bus controllers.
Right-click USB xHCI Compliant Host Controller → Uninstall device.
Check "Delete driver software for this device" if available.
Restart your PC. Windows will automatically reinstall the correct inbox driver.

Part 7: Frequently Asked Questions (FAQ)

Fix 1: Reinstall the Driver via Device Manager (Quickest)

Open Device Manager.
Right-click USB xHCI Compliant Host Controller.
Select Uninstall device.
- Check "Delete the driver software for this device" if available.
Restart your computer.
Windows will automatically reinstall the driver from its driver store upon reboot.

Method 2: Update driver via Windows Update

Go to Settings → Update & Security → Windows Update.
Click View optional updates → Driver updates.
Look for any "xHCI" or "USB Controller" updates.
Install and restart.

Part 3: Common Problems with the xHCI Driver on Windows 10 64-Bit

Despite its reliability, users frequently encounter issues. Here are the most common error scenarios:

2. "USB Device Not Recognized" Popup

Cause: The xHCI driver failed to enumerate the device. Often happens after sleep/resume or when using a USB 3.0 device in a USB 3.0 port.

3. USB devices randomly disconnecting/reconnecting

Usually related to power management or xHCI hand-off in BIOS.