Usbprint Printerpos-802bc2 |link| 🎁 No Survey

The USBPRINT\PrinterPOS-802BC2 identifier refers to a specific hardware ID for an 80mm thermal receipt printer, commonly associated with manufacturers like Xprinter and Beijing Spirit Technology (SPRT). These devices are the backbone of retail and hospitality Point of Sale (POS) systems due to their high speed and low maintenance. 1. Technical Specifications

The "POS-80" series typically follows industry standards for high-volume receipt printing:

Printing Method: Direct Thermal (no ink or ribbon required).

Resolution: 203 DPI (8 dots/mm) for sharp text and barcodes. Usbprint Printerpos-802bc2

Paper Width: 80mm (3 inches), suitable for standard retail receipts.

Print Speed: Capable of reaching up to 152 mm/s to 300 mm/s depending on the specific model.

Interface: USB connection (indicated by the "USBPRINT" prefix), often with secondary options like Bluetooth, Ethernet, or Serial. 2. Industry Standard Protocol: ESC/POS POS Printer Protocols Explained - HPRT checking cable quality

1. The Printer Shows as "USBPRINT" But Won't Print

Cause: The POS software is sending raw data, but Windows is trying to parse it as a text document. Fix: Do not use the "Generic/Text Only" driver. Install the correct ESC/POS driver. Alternatively, configure your POS software to use "Raw Printing" on the USB virtual port.

2.2. Physical Characteristics

Based on the Printerpos identifier, the device typically exhibits the following physical traits:

• Interface: USB Type-B port (standard printer square connector).
• Paper Width: 80mm (3 1/8 inches) thermal paper.
• Control Language: Usually supports ESC/POS (Epson Standard Code for POS) command set. This is the industry standard for thermal printing.
• Appearance: Often beige or white square boxes, sometimes branded with generic names like "POS-80", "Printer-80", or sold unbranded on platforms like Amazon, eBay, and AliExpress.

Option 4: ESC/POS Commands for Developers (C# Example)

using System.IO;
using System.Management;
// Find USBPRINT device
string printerName = "USBPRINT\POS-802BC2"; // Feed 3 lines + cut
// Send raw bytes to printer
RawPrinterHelper.SendStringToPrinter(printerName, "\x1B\x40"); // Initialize
RawPrinterHelper.SendStringToPrinter(printerName, "\x1D\x21\x11"); // Double height/width
RawPrinterHelper.SendStringToPrinter(printerName, "Hello POS-802BC2\n");
RawPrinterHelper.SendStringToPrinter(printerName, "\x1B\x64\x03"); // Feed 3 lines + cut

Note: You need RawPrinterHelper class (available on Microsoft docs) to send raw data to USBPRINT ports.

The Usbprint Printerpos-802bc220 is a generic 80mm thermal receipt printer often installed by connecting via USB and utilizing standard POS-80 drivers, which are frequently configured via virtual USB ports like USB001. Troubleshooting common "not recognized" errors involves changing USB ports, checking cable quality, and resetting the Windows Print Spooler. For comprehensive installation steps, visit Nextar Help Center

How to install POS-58 or POS-80 printer - Help Center Nextar