Visionacibdcom Install - Free

VisionACI BD COM Installation Guide

Complete step-by-step setup for visionacibdcom

4. Connecting Devices (Hardware Setup)

Software installation is only step one. You must now connect your door controllers or biometric readers. visionacibdcom install

Method A: Direct USB Connection

1. Connect the device to the PC via USB.
2. The software should detect the hardware automatically if drivers were installed.
3. Navigate to Device Management > Add Device.
4. Select "USB" as the communication mode.

Method B: Network Connection (TCP/IP)

1. Connect the device to the same network switch/router as the PC.
2. Find the device's IP address (usually displayed on the device screen).
3. In VisionA, go to Device Management.
4. Click Add Device.
5. Enter the IP address, Port (default often 4370 or 5000), and a device name.
6. Click Search or Connect. The status should turn "Online."

1. Overview

VisionAC is a Windows-based Access Control management software used to manage controllers, cardholders, doors, and attendance logs. It is commonly used with IBD-branded hardware controllers (often TCP/IP based). Connect the device to the PC via USB

2.1 System Requirements

| Component | Minimum Requirement | Recommended | |-----------|--------------------|--------------| | OS | Windows 10 / Ubuntu 20.04 | Windows 11 / Ubuntu 22.04 LTS | | RAM | 4 GB | 8 GB+ | | Disk Space | 500 MB free | 1 GB free | | Processor | 2.0 GHz dual-core | 2.5 GHz quad-core | | Network | 100 Mbps (for discovery) | Gigabit Ethernet | | Additional | Admin privileges, .NET Framework 4.8 (Windows) | Virtualization enabled (for containers) | etc. as needed

10. Background workers & cron

• Configure systemd service or Supervisor/PM2 for workers.
• Example systemd service (worker.service):

[Unit]
Description=VisionACI Worker
After=network.target
[Service]
User=visionaci
WorkingDirectory=/var/www/visionacibd.com
ExecStart=/usr/bin/php /var/www/visionacibd.com/artisan queue:work --sleep=3 --tries=3
Restart=always
[Install]
WantedBy=multi-user.target

Enable and start:

sudo systemctl daemon-reload
sudo systemctl enable --now worker.service

1. Prerequisites

• Server: Ubuntu 22.04 LTS (or similar Linux distribution)
• Access: sudo/root access, SSH
• Domain: visionacibd.com pointed to server IP
• Code repository or build artifact
• Required software (example stack — modify as needed):
  • Nginx
  • Git
  • PHP 8.1 + PHP-FPM (if PHP app) or Node 18+ (if Node app) or Python 3.10+ (if Python app)
  • MySQL 8.0 / MariaDB 10.6 or PostgreSQL 14
  • Certbot (for Let's Encrypt SSL)
  • Build tools: npm, composer, pip, etc. as needed