For Winpossee DVRs, the default admin password is typically blank (no password) or one of several common factory defaults used by similar DVR manufacturers. Common Default Credentials Username: admin Default Passwords to Try: (Blank) — Leave the password field empty. 123456 admin 000000 or 111111 12345 How to Reset a Forgotten Password
If the default credentials do not work, you may need to reset the device to factory settings:
Internal Battery Method: On some Winpossee/XMEye-based boards, you can open the DVR case and remove the small CMOS silver battery for approximately 30 seconds. This often resets the system clock and clears the admin password back to the blank default.
Physical Reset Button: Look for a small button on the back or on the internal motherboard. Press and hold it for 10–30 seconds while the unit is powering on.
QR Code Reset: Some modern Winpossee models allow you to generate a reset QR code from the local login screen, which can be scanned using the manufacturer's mobile app (often XMEye or Wecam Pro) to receive a temporary recovery code.
Master Password Generators: If you know the date shown on the DVR's screen, certain "super password" generators for H.264 DVRs can create a one-day master code to unlock the device.
The default password for most Winpossee DVR models is commonly 123456 or admin, while the default username is almost always admin. If these do not work, you can try leaving the password field blank. Common Default Login Credentials admin 123456 admin admin admin (Leave Blank) How to Reset Your Password
If you have changed your password and forgotten it, or the defaults above do not work, use the following methods to regain access:
Super Password Generators: Many Winpossee and generic H.264 DVRs can be unlocked using a "super password" generated from the device's date and time or serial number. Tools like CCTV Super Password or online super password calculators are often used for this purpose.
Physical Reset Button: Some models feature a physical reset button on the motherboard. Power off the device, press and hold the reset button, then power the device back on while continuing to hold the button for 10–30 seconds.
Hardware Jumper (G1/TP1): If no button is present, look for two pins on the motherboard labeled G1 or TP1. While the DVR is off, short these two pins with a conductive material (like a screwdriver), then power the unit on and hold for 60 seconds to trigger a factory reset.
Password Reset XML File: For some newer systems connected to a network, you may be able to export a password reset file (often via SADP or similar manufacturer tools) and submit it to the provider for a reset key.
Security Tip: Once you gain access, immediately change the default password to a unique, strong one to prevent unauthorized access to your security footage. If you'd like, I can help you: Find a super password generator for your specific DVR date. Locate a user manual for your specific Winpossee model. Identify the G1/TP1 jumper pins on your motherboard. How to Reset DVR Password
The default credentials for a Winpossee DVR typically consist of the username with the password field left
. If a blank password does not work, common manufacturer defaults for these and similar H.264-based systems include Techage.com Common Default Credentials (None/Blank) or Techage.com Troubleshooting & Password Reset Methods
If the default credentials have been changed and you are locked out, you can try the following methods used for Winpossee and compatible XMEye-based systems: How to Reset DVR to Factory Default without Password?
Introduction: WinPOSSEE is a brand of digital video recorders (DVRs) commonly used for surveillance and security purposes. If you've purchased a WinPOSSEE DVR, it's essential to know the default password to access the device and configure its settings.
Default Password Information: The default password for WinPOSSEE DVRs varies depending on the model and firmware version. However, based on user reports and manufacturer documentation, here are some common default passwords for WinPOSSEE DVRs:
- Default Admin Password: 12345 or admin
- Default User Password: 1234 or user
How to Reset the Password: If you've forgotten the password or want to reset it to the default, follow these steps:
- Power on the DVR: Ensure the DVR is powered on and connected to a monitor or display.
- Enter the Menu: Press the Menu button on the front panel or remote control to access the DVR's menu.
- System Settings: Navigate to the System Settings or System Configuration menu.
- Password Reset: Look for an option to reset the password, usually labeled as "Password Reset" or "Restore Default Password."
- Enter the Default Password: Enter the default password (12345 or admin) to authenticate.
- Reset the Password: Follow the on-screen instructions to reset the password to the default.
Changing the Default Password: To ensure security, it's highly recommended to change the default password to a strong, unique one. Here's how:
- Log in with the Default Password: Use the default password to log in to the DVR.
- Go to System Settings: Navigate to the System Settings or System Configuration menu.
- Change Password: Look for an option to change the password, usually labeled as "Change Password" or "Modify Password."
- Enter the New Password: Enter a strong, unique password and confirm it.
Tips and Precautions:
- Always keep a record of your DVR's password and store it securely.
- Change the default password immediately to prevent unauthorized access.
- Use a strong password that includes a mix of uppercase and lowercase letters, numbers, and special characters.
- Regularly update your DVR's firmware to ensure you have the latest security patches.
By following this guide, you should be able to access your WinPOSSEE DVR with the default password and configure its settings to meet your needs. If you're still having trouble, consult the user manual or contact the manufacturer's support team for assistance.
The rain lashed against the windows of the security booth, a rhythmic drumming that masked the sound of the old hard drive spinning inside the Winpossee DVR
. Elias, the new night guard, stared at the login screen. The previous guard had vanished without leaving the credentials, and the manager was demanding the footage from the “incident” at the loading dock.
Elias typed "admin" into the username field. His fingers hovered over the password box. He tried the usual suspects: , and even the word . Each time, the screen flashed a mocking red: Invalid Password
He remembered an old forum post about these generic systems. He tried
—a common master key for similar Chinese-manufactured boards. Nothing. He tried leaving it , another common default for systems like . Still, the lock held. Just as he was about to give up and look for a physical reset button
, he recalled a specific sequence used by Longse and Winpossee-related firmware:
He typed the five digits. The drive chirped, the red text vanished, and the grid of 16 grainy camera feeds flickered to life. The default admin password
. Elias leaned back, the blue light of the monitor reflecting in his eyes, finally able to see what the darkness had been hiding. for performing a hard factory reset on this type of hardware?
Username – Password – IP Address- for Security Cameras and NVR
Step 1: Check the Device Sticker
Flip the DVR over. Look for a sticker that says "Default IP," "Username," or "Password." Some Winpossee units have unique default passwords printed directly on the serial number label (e.g., a random alphanumeric string like W1234567). Never share this sticker online.
9. Conclusion
The Winpossee DVR default password problem is a classic IoT security failure: convenience over safety. Despite being a lower-cost consumer brand, the risk is real — attackers scan for these defaults continuously. If you own a Winpossee DVR and have never changed the password, assume it has been or will be compromised.
Appendix – Default Password Quick Reference for Winpossee Models:
- Winpossee WNVR-108:
admin/ blank - Winpossee H.265 DVR:
admin/123456 - Winpossee 1080P DVR Kit:
admin/888888 - Generic XMeye firmware:
admin/ blank (most common)
To change password:
- Via Web interface:
Configuration → System → User → admin → Modify - Via App: Device Settings → Change Device Password (may require old password; if blank, leave empty).
Quick recovery checklist (actionable)
- Attempt default combos: admin/admin, admin/123456, admin/888888.
- Inspect device label and manual for model-specific defaults.
- If login fails, back up recordings (if accessible) then perform factory reset per manual.
- After reset, immediately change admin password and update firmware.
- Disable remote access or put behind VPN.
- Monitor logs and change passwords periodically.
