The WorldCup Device Driver is a specific USB driver used for flashing and updating the ZTE STB B860H
, an Amlogic-based set-top box. It allows the Amlogic USB Burning Tool to communicate with the device when it is in recovery or "WorldCup" mode. Download Links
You can find the necessary driver files and tools through the following community-maintained sources:
GitHub (Driver Files): Amlogic USB Drivers Repository contains the WorldCup_Device.inf and signed certificates. MediaFire (Direct Driver): Amlogic USB WorldCup Driver.
The MINIX Forum: Amlogic USB Burning Tool and Driver v2.0.9 provides an integrated installer for the tool and drivers. Installation Guide To ensure the
is recognized by your PC (Windows 7/8/10/11), follow these steps: Certificate Installation (Mandatory):
Right-click libusb-win32.cer and select Install Certificate.
Choose Local Machine and manually place the certificate in both the Trusted Root Certification Authorities and Trusted Publishers stores. Legacy Hardware Addition: worldcup device driver stb b860h link
Open Device Manager, click the Action menu, and select Add legacy hardware.
Choose Install the hardware that I manually select > Show All Devices > Have Disk.
Browse to and select the WorldCup_Device.inf file from your downloaded folder. Connecting the STB: Use a USB Male-to-Male cable.
While the STB is powered off, hold the Power or Reset button and connect it to the USB OTG port (usually the one closest to the power inlet).
If correctly installed, the device will appear as "WorldCup Device" under libusb-win32 devices in Device Manager. Technical Details Hardware IDs: USB\VID_1B8E&PID_C003. Driver Version: 1.2.6.0 (dated 01/18/2012).
Compatibility: Supports Windows 7 through Windows 10 (64-bit). Burning Tool no Device - Khadas Community
The "WorldCup" device driver is essential for connecting a ZTE B860H set-top box (STB) to a computer for flashing or unlocking purposes. It allows the Amlogic USB Burning Tool to recognize the device when it is in recovery or bootloader mode. Driver Download & Installation The WorldCup Device Driver is a specific USB
You can find the necessary driver files on community repositories like GitHub (ewwink). 1. Manual Driver Installation
If the driver does not install automatically, use these steps: Open Device Manager on your PC. Select Action > Add legacy hardware.
Choose Install the hardware that I manually select from a list > Next.
Click Have Disk and browse to the extracted folder to find the WorldCup_Device.inf file.
2. Installing the Driver Certificate (Required for Windows 10/11)
Since these drivers are often self-signed, you must install the certificate to avoid digital signature errors: Locate libusb-win32.cer in your driver folder. Double-click the file and select Install Certificate.
Choose Local Machine > Place all certificates in the following store. Troubleshooting
Select Trusted Root Certification Authorities and Trusted Publishers as the destination stores. How to Connect the STB B860H Open the Amlogic USB Burning Tool. Use a USB Male-to-Male cable.
Hold the Power Button on the STB while plugging the cable into the USB Port 2 (usually the one closest to the power jack).
If the driver is correctly installed, the tool will show "Connect Success".
Do you need the firmware links or the specific version of the USB Burning Tool for this model?
ewwink/driver-usb-vcom-stb-b860h-760h-amlogic-mediatek - GitHub
Device Not Recognized: If your computer doesn’t recognize the STB B860H even after installing the driver, ensure the device is properly connected (via USB, for example) and try a different USB port or cable if necessary.
Driver Update: If the device was working and stopped, or if you're experiencing issues, consider updating the driver. You might need to go through the device manager on your computer to update or reinstall the driver.
Compatibility: Ensure that the driver version you are installing is compatible with your operating system version.
This is the primary "link" between your PC and the B860H. Download version 2.2.4 or higher. Load a .img firmware file (e.g., custom Android TV 9 or ATV 10), click Start, then connect your B860H. The tool will "link" to the device via the WorldCup driver and begin flashing.
insmod or kernel built-in.