Software Update ^new^ - Xzent X-422
The XZENT X-422 software update is essential for maintaining compatibility with modern smartphones (e.g., Android 10 support) and improving system stability. Updates typically include both APP (system applications) and MCU (microcontroller unit) firmware components. 1. Preparation Requirements Before starting, ensure you have the following:
A compatible data carrier: Use a USB flash drive or Micro SD card with a maximum capacity of 8 GB, formatted to FAT32.
Software Files: Download the latest version (e.g., v1.3) from the XZENT Support Product Archive.
Important Warning: Never use your original navigation Micro SD card for system updates, as this may corrupt your map data. 2. Software Extraction
Download the self-extracting .exe file (e.g., X-422_Update_v1.3.exe) to your PC. Double-click the file to open the extraction utility.
Select your USB drive/SD card as the destination and click "Extract" to unpack all folders directly to the root directory. 3. Installation Steps Follow these steps carefully to avoid bricking the device: Power Off: Turn off the XZENT head unit.
Insert Media: Plug the prepared USB stick or Micro SD card into the device.
Power On: Turn on the unit. The update process will typically start automatically. Automatic Sequence:
Step A: The device deletes old applications and copies new ones (APP update).
Step B: A progress bar will appear. Once it reaches 100%, the MCU update will begin automatically.
Completion: When the "Update Successful" or "MCU Complete" message appears, remove the data carrier before pressing the "OK" button to prevent the update from restarting. 4. Verification To confirm the update was successful: Navigate to SETTINGS > Others (or System) on your device.
Compare the displayed APP and MCU versions with the version notes in your downloaded update package. 5. Troubleshooting Tips
"Update Not Starting": Ensure the files are in the root directory and not inside a subfolder.
Button Unresponsive: If the "OK" button cannot be confirmed, check if you have used the correct USB port (typically USB-1). xzent x-422 software update
Power Continuity: Do not turn off the engine or disconnect power while the progress bar is moving, as this can cause permanent system failure. Produktarchive: Manuals - XZENT
Software Updates * Download Installationsanleitung DE. * Download installation guide EN. * Download update v1.3 (.exe, 44.2 MB) Software Update Anleitung X-422 v1.3 - XZENT
The current stable software version for the XZENT X-422 , which was released to improve system stability and enhance compatibility for smartphone integration. Update Overview: Version 1.3 The v1.3 update specifically addresses support for Android OS 10
via the "EasyConnect" (PhoneLink) app. It is available for download through the XZENT Product Archive Preparation Checklist : You will need a USB 2.0 flash drive or a Micro SD card with a maximum capacity of : The drive must be formatted to Source File : Download the X-422_Update_v1.3.exe
file. This is a self-extracting archive; you must run it on your PC to extract the update files to the root directory of your USB/SD card.
use the original navigation Micro SD card for this system update, as it may corrupt your map data. Installation Process The update process typically takes about (excluding preparation). Connection : Ensure the unit is powered off. Plug the USB drive into USB port 1
(do not have devices in both ports simultaneously) or insert the SD card into the slot.
: Power on the head unit. The system should automatically detect the update. App Update
: The unit will first delete old applications and copy new ones. A progress bar will show the status. MCU Update
: Following the app update, the Microcontroller Unit (MCU) will update. Do turn off the power during this phase. Completion : Once the screen displays "Update Successful" or "OK," remove the USB/SD card first
before pressing the "OK" button on the screen to prevent the update from looping. Final Step : Perform a factory reset
in the system settings to ensure all changes take effect properly. Navigation Map Updates
If you are looking to update your maps (X-MAP22FEU or X-MAP22FEU-MH), this is handled separately from the system software. Register and download the Toolbox software Naviextras web portal The XZENT X-422 software update is essential for
Connect your original navigation SD card to your PC to download the latest available map data. for the v1.3 firmware or help with troubleshooting a failed installation? Software Update Manual X-422 v1.3 - XZENT
How to Check Your Current Version
- Go to Settings > System > About Machine.
- Look for MCU Version and System Version.
- The latest stable version as of 2024/2025 is typically v1.4.2 or higher (depending on your region).
Method B – Recovery mode (if Settings doesn’t work)
- Power off the X-422 completely.
- Insert USB drive.
- Press and hold the Reset button (pinhole near buttons/USB) + Power button.
- Keep holding until the screen shows “Update Mode” or recovery menu.
- Select “Apply update from USB”.
- Wait for completion.
What to Expect in a Software Update
Software updates typically include:
- Bug Fixes: Corrections to issues that affect the user experience.
- New Features: Enhancements or completely new functionalities.
- Performance Improvements: General speed or efficiency improvements.
- Security Patches: Updates that protect your device from known vulnerabilities.
Identifying Your Current Xzent X-422 Firmware Version
Before you hunt for a software update, you must know what version you are running. Here’s how:
- Turn on your Xzent X-422.
- Go to Settings (gear icon on the home screen).
- Scroll to System or About Device (depending on UI version).
- Look for Firmware Version, MCU Version, or Software Version.
Typical version numbers look like: X422_V1.2.3_20231015 or X422_MCU_4.3. Write this down. Then, check the official Xzent support website (or authorized dealer portals) to see if a newer build exists.
Pro Tip: Some units have a hidden "System Info" screen. Tap the "Android version" number repeatedly to reveal additional debug info.
Verdict
Should you bother updating?
- No, if you are trying to fix bugs: If your radio is glitchy or slow, the update will not help. It is better to perform a "Factory Reset" (which wipes your data) to see if that clears temporary cache issues.
- Yes, if you need the specific Xzent Connect app: If you are setting up the device for the first time and need the phone-connectivity app installed, you must perform this update.
Final Score: 3/10 The support lifecycle for the X-422 is effectively stagnant. The "software update" is misleadingly named—it is more of an "App Installer" than a system update. Users looking for modern features or performance improvements will likely be disappointed and may want to consider upgrading to a newer Xzent model (like the X-402 flagship or newer) or a standard Android head unit.
The most recent official software for the XZENT X-422 version 1.3 . Because this model is now considered a legacy product, its updates are hosted in the XZENT Product Archive Key Improvements in v1.3
The primary focus of this update is system stability and smartphone integration: Android OS 10 Support:
Updates the "EasyConnect" (Hewei PhoneLink) connection to ensure compatibility with Android 10 devices. System Refinement:
General bug fixes and performance improvements for the main system and MCU (Microcontroller Unit). Preparation Checklist Before starting, ensure you have the following:
A USB flash drive or Micro SD card with a maximum capacity of , formatted to Download the official v1.3 update file X-422_Update_v1.3.exe ) from the XZENT Archive
use the original navigation Micro SD card for this update, as it may corrupt your map data. Step-by-Step Installation Extract Files: Run the downloaded Go to Settings > System > About Machine
file on your PC and extract its contents directly to the root directory of your USB/SD card. Connect Media: Turn off the X-422. Insert the prepared USB drive (use USB-1 port only) or the Micro SD card. Initiate Update:
Power on the unit. The device should automatically detect the files and begin a two-stage process:
Deleting old applications and copying new ones (APP update). Updating the MCU. Completion:
Once the progress bar reaches 100% and an "OK" or "Complete" prompt appears, remove the media
before pressing OK to prevent the update from restarting in a loop. Updating Navigation Maps Standard system updates do include map updates. For map data: Naviextras Toolbox
Register your device and insert your original navigation SD card into the PC to check for available free or paid updates.
Never disconnect the power or turn off the vehicle while the update is in progress, as this can permanently "brick" the head unit. direct download link
for the v1.3 installation manual or firmware file from the archive? Software Update Manual X-422 v1.3 - XZENT
Precautions:
- Backup your data: Before updating the software, make sure to backup your important data, such as contacts, messages, and navigation data, to prevent any loss during the update process.
- Charge your device: Ensure your Xzent X-422 is fully charged or has a sufficient battery level to avoid any interruptions during the update process.
Update Methods:
The Xzent X-422 may support two update methods:
- USB Update: Using a USB drive to update the software.
- Online Update: Updating the software directly from the device's settings menu.
Step-by-Step Guide:
The XZENT X-422 software update is essential for maintaining compatibility with modern smartphones (e.g., Android 10 support) and improving system stability. Updates typically include both APP (system applications) and MCU (microcontroller unit) firmware components. 1. Preparation Requirements Before starting, ensure you have the following:
A compatible data carrier: Use a USB flash drive or Micro SD card with a maximum capacity of 8 GB, formatted to FAT32.
Software Files: Download the latest version (e.g., v1.3) from the XZENT Support Product Archive.
Important Warning: Never use your original navigation Micro SD card for system updates, as this may corrupt your map data. 2. Software Extraction
Download the self-extracting .exe file (e.g., X-422_Update_v1.3.exe) to your PC. Double-click the file to open the extraction utility.
Select your USB drive/SD card as the destination and click "Extract" to unpack all folders directly to the root directory. 3. Installation Steps Follow these steps carefully to avoid bricking the device: Power Off: Turn off the XZENT head unit.
Insert Media: Plug the prepared USB stick or Micro SD card into the device.
Power On: Turn on the unit. The update process will typically start automatically. Automatic Sequence:
Step A: The device deletes old applications and copies new ones (APP update).
Step B: A progress bar will appear. Once it reaches 100%, the MCU update will begin automatically.
Completion: When the "Update Successful" or "MCU Complete" message appears, remove the data carrier before pressing the "OK" button to prevent the update from restarting. 4. Verification To confirm the update was successful: Navigate to SETTINGS > Others (or System) on your device.
Compare the displayed APP and MCU versions with the version notes in your downloaded update package. 5. Troubleshooting Tips
"Update Not Starting": Ensure the files are in the root directory and not inside a subfolder.
Button Unresponsive: If the "OK" button cannot be confirmed, check if you have used the correct USB port (typically USB-1).
Power Continuity: Do not turn off the engine or disconnect power while the progress bar is moving, as this can cause permanent system failure. Produktarchive: Manuals - XZENT
Software Updates * Download Installationsanleitung DE. * Download installation guide EN. * Download update v1.3 (.exe, 44.2 MB) Software Update Anleitung X-422 v1.3 - XZENT
The current stable software version for the XZENT X-422 , which was released to improve system stability and enhance compatibility for smartphone integration. Update Overview: Version 1.3 The v1.3 update specifically addresses support for Android OS 10
via the "EasyConnect" (PhoneLink) app. It is available for download through the XZENT Product Archive Preparation Checklist : You will need a USB 2.0 flash drive or a Micro SD card with a maximum capacity of : The drive must be formatted to Source File : Download the X-422_Update_v1.3.exe
file. This is a self-extracting archive; you must run it on your PC to extract the update files to the root directory of your USB/SD card.
use the original navigation Micro SD card for this system update, as it may corrupt your map data. Installation Process The update process typically takes about (excluding preparation). Connection : Ensure the unit is powered off. Plug the USB drive into USB port 1
(do not have devices in both ports simultaneously) or insert the SD card into the slot.
: Power on the head unit. The system should automatically detect the update. App Update
: The unit will first delete old applications and copy new ones. A progress bar will show the status. MCU Update
: Following the app update, the Microcontroller Unit (MCU) will update. Do turn off the power during this phase. Completion : Once the screen displays "Update Successful" or "OK," remove the USB/SD card first
before pressing the "OK" button on the screen to prevent the update from looping. Final Step : Perform a factory reset
in the system settings to ensure all changes take effect properly. Navigation Map Updates
If you are looking to update your maps (X-MAP22FEU or X-MAP22FEU-MH), this is handled separately from the system software. Register and download the Toolbox software Naviextras web portal
Connect your original navigation SD card to your PC to download the latest available map data. for the v1.3 firmware or help with troubleshooting a failed installation? Software Update Manual X-422 v1.3 - XZENT
How to Check Your Current Version
- Go to Settings > System > About Machine.
- Look for MCU Version and System Version.
- The latest stable version as of 2024/2025 is typically v1.4.2 or higher (depending on your region).
Method B – Recovery mode (if Settings doesn’t work)
- Power off the X-422 completely.
- Insert USB drive.
- Press and hold the Reset button (pinhole near buttons/USB) + Power button.
- Keep holding until the screen shows “Update Mode” or recovery menu.
- Select “Apply update from USB”.
- Wait for completion.
What to Expect in a Software Update
Software updates typically include:
- Bug Fixes: Corrections to issues that affect the user experience.
- New Features: Enhancements or completely new functionalities.
- Performance Improvements: General speed or efficiency improvements.
- Security Patches: Updates that protect your device from known vulnerabilities.
Identifying Your Current Xzent X-422 Firmware Version
Before you hunt for a software update, you must know what version you are running. Here’s how:
- Turn on your Xzent X-422.
- Go to Settings (gear icon on the home screen).
- Scroll to System or About Device (depending on UI version).
- Look for Firmware Version, MCU Version, or Software Version.
Typical version numbers look like: X422_V1.2.3_20231015 or X422_MCU_4.3. Write this down. Then, check the official Xzent support website (or authorized dealer portals) to see if a newer build exists.
Pro Tip: Some units have a hidden "System Info" screen. Tap the "Android version" number repeatedly to reveal additional debug info.
Verdict
Should you bother updating?
- No, if you are trying to fix bugs: If your radio is glitchy or slow, the update will not help. It is better to perform a "Factory Reset" (which wipes your data) to see if that clears temporary cache issues.
- Yes, if you need the specific Xzent Connect app: If you are setting up the device for the first time and need the phone-connectivity app installed, you must perform this update.
Final Score: 3/10 The support lifecycle for the X-422 is effectively stagnant. The "software update" is misleadingly named—it is more of an "App Installer" than a system update. Users looking for modern features or performance improvements will likely be disappointed and may want to consider upgrading to a newer Xzent model (like the X-402 flagship or newer) or a standard Android head unit.
The most recent official software for the XZENT X-422 version 1.3 . Because this model is now considered a legacy product, its updates are hosted in the XZENT Product Archive Key Improvements in v1.3
The primary focus of this update is system stability and smartphone integration: Android OS 10 Support:
Updates the "EasyConnect" (Hewei PhoneLink) connection to ensure compatibility with Android 10 devices. System Refinement:
General bug fixes and performance improvements for the main system and MCU (Microcontroller Unit). Preparation Checklist Before starting, ensure you have the following:
A USB flash drive or Micro SD card with a maximum capacity of , formatted to Download the official v1.3 update file X-422_Update_v1.3.exe ) from the XZENT Archive
use the original navigation Micro SD card for this update, as it may corrupt your map data. Step-by-Step Installation Extract Files: Run the downloaded
file on your PC and extract its contents directly to the root directory of your USB/SD card. Connect Media: Turn off the X-422. Insert the prepared USB drive (use USB-1 port only) or the Micro SD card. Initiate Update:
Power on the unit. The device should automatically detect the files and begin a two-stage process:
Deleting old applications and copying new ones (APP update). Updating the MCU. Completion:
Once the progress bar reaches 100% and an "OK" or "Complete" prompt appears, remove the media
before pressing OK to prevent the update from restarting in a loop. Updating Navigation Maps Standard system updates do include map updates. For map data: Naviextras Toolbox
Register your device and insert your original navigation SD card into the PC to check for available free or paid updates.
Never disconnect the power or turn off the vehicle while the update is in progress, as this can permanently "brick" the head unit. direct download link
for the v1.3 installation manual or firmware file from the archive? Software Update Manual X-422 v1.3 - XZENT
Precautions:
- Backup your data: Before updating the software, make sure to backup your important data, such as contacts, messages, and navigation data, to prevent any loss during the update process.
- Charge your device: Ensure your Xzent X-422 is fully charged or has a sufficient battery level to avoid any interruptions during the update process.
Update Methods:
The Xzent X-422 may support two update methods:
- USB Update: Using a USB drive to update the software.
- Online Update: Updating the software directly from the device's settings menu.
Step-by-Step Guide:
iCloud Unlock Service – Israel Region – iPhone – Clean IMEI Only
Purchase Country: ✨ China | Japan | Korea | Hong Kong | Thailand | Indonesia | Vietnam | Taiwan ✨ iCloud Activation Lock Remove Service
iCloud Activation Lock Remove - ✨ China | Japan | Korea | Hong Kong | Thailand | Indonesia | Vietnam | Taiwan ✨ (iPhone 16 Series)
$210
BuyiCloud Activation Lock Remove - ✨ China | Japan | Korea | Hong Kong | Thailand | Indonesia | Vietnam | Taiwan ✨ (iPhone 15 Series)
$190
BuyiCloud Activation Lock Remove - ✨ China | Japan | Korea | Hong Kong | Thailand | Indonesia | Vietnam | Taiwan ✨ (iPhone 14 Series)
$170
BuyiCloud Activation Lock Remove - ✨ China | Japan | Korea | Hong Kong | Thailand | Indonesia | Vietnam | Taiwan ✨ (iPhone 11 Series)
$140
BuyiCloud Activation Lock Remove - ✨ China | Japan | Korea | Hong Kong | Thailand | Indonesia | Vietnam | Taiwan ✨ (iPhone 12 Series)
$150
BuyUSA Premium iCloud Removal Service
USA iCloud Activation Lock Remove ✨ Amazon | Best Buy | Walmart | Target | Costco | Sam’s Club | B&H Photo Video | Newegg ✨ (iPhone 11-12 Series) - Clean 99% Success
$140
BuyUSA iCloud Activation Lock Remove ✨ Amazon | Best Buy | Walmart | Target | Costco | Sam’s Club | B&H Photo Video | Newegg ✨ (iPhone 13 Series) - Clean 99% Success
$150
BuyUSA iCloud Activation Lock Remove ✨ Amazon | Best Buy | Walmart | Target | Costco | Sam’s Club | B&H Photo Video | Newegg ✨ (iPhone 14 Series) - Clean 99% Success
$160
BuyUSA iCloud Activation Lock Remove ✨ Amazon | Best Buy | Walmart | Target | Costco | Sam’s Club | B&H Photo Video | Newegg ✨ (iPhone 15 Series) - Clean 99% Success
$170
BuyiCloud Activation Lock Remove - ✨Mexico, Brasil, Colombia, Peru, Ecuador, Venezuela, Chile..✨
iCloud Activation Lock Remove - ✨ Argentina | Brazil | Chile | Colombia | Ecuador | Peru | Venezuela | Uruguay | Paraguay | Bolivia ✨ (iPhone 11 Series) - Clean 99% Success
$115
BuyiCloud Activation Lock Remove - ✨ Argentina | Brazil | Chile | Colombia | Ecuador | Peru | Venezuela | Uruguay | Paraguay | Bolivia ✨ (iPhone 12 Series) - Clean 99% Success
$120
BuyiCloud Activation Lock Remove - ✨ Argentina | Brazil | Chile | Colombia | Ecuador | Peru | Venezuela | Uruguay | Paraguay | Bolivia ✨ (iPhone 13 Series) - Clean 99% Success
$130
BuyiCloud Activation Lock Remove - ✨ Argentina | Brazil | Chile | Colombia | Ecuador | Peru | Venezuela | Uruguay | Paraguay | Bolivia ✨ (iPhone 14 Series) - Clean 99% Success
$140
BuyiCloud Activation Lock Remove - ✨ Argentina | Brazil | Chile | Colombia | Ecuador | Peru | Venezuela | Uruguay | Paraguay | Bolivia ✨ (iPhone 15 Series) - Clean 99% Success
$150
BuyiCloud Activation Lock Remove - ✨ Argentina | Brazil | Chile | Colombia | Ecuador | Peru | Venezuela | Uruguay | Paraguay | Bolivia ✨ (iPhone 16 Series) - Clean 99% Success
$160
BuyArabic Countries High Success iCloud Removal Service
iCloud Activation Lock Remove - ✨Arabic Countries Fresh IMEI ONLY✨ (iPhone 11 Series) - Clean 99% Success
$120
BuyiCloud Activation Lock Remove - ✨Arabic Countries Fresh IMEI ONLY✨ (iPhone 12 Series) - Clean 99% Success
$130
BuyiCloud Activation Lock Remove - ✨Arabic Countries Fresh IMEI ONLY✨ (iPhone 13 Series) - Clean 99% Success
$140
BuyiCloud Activation Lock Remove - ✨Arabic Countries Fresh IMEI ONLY✨ (iPhone 15 Series) - Clean 99% Success
$160
BuyiCloud Activation Lock Remove - ✨Arabic Countries Fresh IMEI ONLY✨ (iPhone 14 Series) - Clean 99% Success
$150
BuyiCloud Activation Lock Remove - ✨Arabic Countries Fresh IMEI ONLY✨ (iPhone 16 Series) - Clean 99% Success
$180
BuyEasy to use, always up-to-date
The Minacriss iPhone and iPad Unlock Tools are the best way to solve the most common issues iOS users may experience. If you have an iCloud-locked device, you must have Apple ID and password to unlock it. We have developed professional tools ready to unlock an iCloud-locked iPhone and iPad and remove the Apple ID account from your device without a password with a single click!
iCloud Bypass iPhone & iPad Hello Screen
The iCloud Activation Lock screen is one of the most common issues iPhone and iPad users may experience. If you have an iCloud-locked device, you must have Apple ID and Password to unlock it. Our dev team has developed professional tools to solve these issues. With these tools, users can unlock their device, bypass iCloud Locked iPhone and iPad, and remove Apple ID account from Apple device, just in one click!
Disclaimer
I don't intend to promote stealing or illegal removing for business purpose is prohibited. This process is for only those has unable to activate error or who forgot the password of their own iCloud account or don't have access to the recovery options anymore. Jailbreaking & Rooting is 100 % legal and covered under the Digital Millennium Copyright Act (DMCA) Under this Act you can Jailbreak or Root your device legally. In the video No Installation of any illicit or piracy violated things. Our sole purpose is to raise awareness related to right to repair and help viewers to learn new ways to fix the issues with their devices and system under the right to repair act. Copyright Disclaimer Under Section 107 of the Copyright Act 1976, allowance is made for "fair use" for purposes such as criticism, comment, news reporting, teaching, scholarship, and research. Fair use is a use permitted by copyright statute that might otherwise be infringing. Non-profit, educational or personal use tips the balance in favor of fair use. Minacriss is not responsible for any misuse of the provided information.