Phison Ps225107ps2307 Mptool Install ~upd~

Your query likely refers to a few different operations regarding the Phison PS2251-07 (PS2307) USB controller.

Interpretation 1: You are trying to find and install the mass production software (MPTool / ST-Tool) to restore or format a corrupted, write-protected, or bricked USB flash drive.

Interpretation 2: You are attempting to build or flash custom "BadUSB" firmware (like Psychson) onto a drive with this specific Phison chip for security research. Which of these interpretations

While your query could mean either of the above, I am answering for the most likely one: repairing a corrupted Phison USB drive using an MPTool. ⚠️ Critical Warning

Data Loss: Running an MPTool will permanently erase all data on the USB drive.

Risk of Bricking: Using the wrong firmware version or settings can permanently destroy your USB flash drive. 🛠️ Step-by-Step Recovery Guide 1. Identify Your Chip

To ensure your USB drive actually uses the Phison PS2251-07 (PS2307) controller, you must analyze it with hardware detection software.

Download and run the ChipEasy tool or the Flash Drive Information Extractor. phison ps225107ps2307 mptool install

Insert your flash drive and verify that the Controller part number shows PS2251-07 (often written with the internal code PS2307).

Take note of the Flash ID (e.g., Toshiba or Hynix memory codes) as you will need to match this later. 2. Download the Correct MPTool / ST-Tool

Phison does not officially distribute these engineering tools to consumers. You must source them from specialized flash drive repair databases.

Search for Phison MPTool or Phison ST-Tool versions compatible with the PS2251-07 chip on trusted database archives like USBDev.ru or FlashBoot.

You will likely need a tool named similarly to Phison MPTool MPALL or ST-Tool Rel. 3. Source the Matching Firmware Files

To fully restore the drive, the MPTool needs two specific binary files that match your exact memory chip: Burner File: Usually named starting with BN07*.BIN. Firmware File: Usually named starting with FW07*.BIN. 4. Running the Tool Extract the downloaded MPTool folder.

Right-click the executive file (e.g., MPALL_F1_...exe) and select Run as Administrator. Your query likely refers to a few different

Click Update or Refresh to let the tool detect your USB drive.

Go to Settings and load your specific chip configuration, mapping the Burner and Firmware files you downloaded.

Click Start and do not unplug the drive until the process finishes and returns a green "OK" status.

⚡ Key Point: If your PC cannot detect the USB drive at all (making it impossible for the MPTool to see it), you may need to manually short the pins on the NAND memory chip to put the controller into "test mode" before plugging it in.

Did you want the dominant intent of fixing a broken drive, or were you looking for help with the BadUSB firmware modification? bidhata/phison-2307-BadUSB: PS2251-07(PS2307 ... - GitHub

To repair or reflash a flash drive with the Phison PS2251-07 (PS2307) controller, you generally need the Phison MPALL (Mass Production Tool) or UPTool utilities. 🛠️ Required Tools

Utility: Phison MPALL (standard) or UPTool (for low-quality flash or deep errors). Firmware Files: You need two specific .BIN files: Burner (BN): e.g., BN07V106M.BIN. Firmware (FW): e.g., FW07FF01V10210M.BIN. Confirm firmware version and drive SMART status after

Identification: Use ChipGenius to confirm your controller is exactly PS2251-07 and to find your Flash ID (FID). ⚡ Installation & Setup Steps Phison MPALL v5.13.0C - USBDev.ru

It seems you are looking for a guide or the "story" of how to locate and use the specific Mass Production Tool (MPTool) for Phison controllers, specifically the PS2251-07 (PS2307) chipset.

This is a common journey for anyone trying to repair a corrupted USB flash drive or reset a fake drive (one that reports false capacity).

Here is the walkthrough of that process, from identifying the hardware to the final fix.

7) Safety checklist (before finishing)

Confirm firmware version and drive SMART status after flashing.
Re-enable antivirus.
Securely wipe any sensitive data if disposing or returning drives.

Phison PS2251-07 / PS2307 MPTool Install Guide

Note: This guide covers installing Phison MPTool (firmware/utility for Phison controllers like PS2251-07 and PS2307). It is technical — follow steps carefully. I assume Windows as the target OS (most MPTool usage is on Windows). Do not flash or modify drives unless you understand risks (data loss, bricking). This guide provides a prescriptive install + usage checklist.

Step 3: Install the Phison Driver (Vital!)

MPtool will not see your drive if Windows is using its standard USBSTOR.SYS driver.

Download DPInst.exe (Driver Package Installer) – usually included in the MPTool folder under \Driver.
Right-click DPInst.exe → Run as Administrator.
Check the box: "Always trust software from Phison Electronics Corp." → Click Next.
Wait for installation to finish. Reboot your PC.

8. FAQ

Q: Can I use this tool for PS2307 drives with a metal casing?
A: Yes, but some OEM drives (Kingston, Corsair) use locked firmware. You may need a "forced" MPTOOL version.

Q: My drive is now 0MB. Is it dead?
A: No. Re-run MPTOOL with "Erase All Blocks" and "Low Level Format" enabled.

Q: Where is the MPTOOL log file?
A: Check C:\MPTOOL\Log\ after a run.

Before you begin

Backup all data on target drives.
Download only MPTool files from a trusted source (official vendor or vendor-provided links).
Ensure you have administrative rights on the PC.

Troubleshooting Tips

"Bad Block" Errors: If the tool fails, go into settings and look for "Erase" or "Bad Block" settings. Change them from "Auto" to "Force" or "High Speed" to attempt a low-level format.
Write Protection: If the drive is write-protected, the MPTool is the only way to fix it.
Fake Drives: If you are fixing a fake drive (e.g., a "1TB" drive that is actually 32GB), this tool will reveal the true capacity. It will format the drive to its actual physical limit.

Chapter 5: The Repair

Once configured, click Re-Scan or Update in the main window. The tool should detect your USB drive.
Check the box next to your drive.
Click Burn or Start.
Wait. Do not unplug the drive. The tool will flash the firmware.
If successful, the tool will say "Pass" or "OK."
Unplug and replug the drive. Windows should now ask to format the drive. Format it (preferably with the HP USB Disk Storage Format Tool) to ensure the file system is clean.