Xface Pro Zkteco Pdf [2024]

The ZKTeco (and its Pro variants) is a high-performance facial recognition terminal designed for access control and time attendance . While "xFace Pro" often refers to the

series, this guide covers the core setup, enrollment, and management based on official ZKTeco ProFace X documentation 1. Hardware Overview & Installation : Install the device at a height of approximately 1.5 meters (4.9 ft) for optimal face capture

: The back panel includes ports for Power (12V DC), Ethernet (TCP/IP), Wiegand Input/Output, and a Relay for door locks Environment

: For [TD] (Temperature Detection) models, avoid placing the device near air conditioners or direct sunlight, as this affects thermal accuracy 2. First-Time Login & Security Installation Guide - ZKTeco

document: * Access Control> * Software> * Access Control> * Access Control> * Software> * Software> ProFace X - ZKTeco

Download * Proface X_Datasheet_20260210. User Manual. 10.87MB. ProFaceX [TD] - ZKTeco

The ZKTeco XFace Pro is a high-performance multi-biometric terminal designed for advanced time attendance and access control. It combines facial recognition, fingerprint scanning, and RFID card functions to provide a secure and flexible authentication solution. This terminal is particularly noted for its high-speed verification and robust security features, making it suitable for environments like hospitals, factories, and commercial buildings. Core Features and Performance

The XFace Pro leverages ZKTeco’s latest biometric algorithms to ensure accuracy and speed:

Rapid Verification: The device can verify faces in less than 0.3 seconds.

SilkID Fingerprint Technology: Features the advanced SilkID reader, which maintains stable performance under strong light and accurately reads wet or rough fingers.

Anti-Spoofing Capability: It includes sophisticated algorithms to detect and prevent "fake face" attacks, such as photos or videos.

Power Efficiency: An infrared sensor allows the terminal to automatically turn on when a user is detected, saving power during idle periods.

Internal Backup Battery: Comes equipped with a 2000mAh battery that provides up to 5 hours of operation during power outages. Technical Specifications

For detailed technical planning, the following specifications are standard for the XFace Pro series: Display: 2.8-inch TFT touch screen. Face Capacity: Supports 3,000 face templates. Fingerprint Capacity: Supports up to 5,000 templates. Card Capacity: Up to 20,000 ID cards. Transaction Logs: Can store up to 100,000 records.

Communication: Integrated options for TCP/IP, USB-Host, and Wi-Fi. Operating Temperature: Ranges from 0°C to 45°C. Installation and Integration

The XFace Pro is designed for versatile deployment as a standalone system or integrated with third-party security hardware: ProFace X - ZKTeco

The ZKTeco X Face Pro Go to product viewer dialog for this item.

is a high-security multi-biometric terminal designed for time attendance and access control. It is particularly noted for its integrated SilkID fingerprint reader, which provides stable operation under strong light and accurate verification for wet or rough fingers. Key Technical Specifications

The device combines multiple verification methods to ensure security and flexibility in enterprise environments:

Biometric Capacity: Supports up to 3,000 face templates and 5,000 fingerprint templates.

Card & Records: Holds up to 20,000 ID cards and stores a transaction log of 100,000 records.

Display: Features a 2.8-inch TFT touch screen for user interaction and menu navigation. xface pro zkteco pdf

Connectivity: Integrated communication options include TCP/IP, USB-Host, and Wi-Fi.

Backup Power: Equipped with a built-in 2,000mAh backup battery, providing approximately 5 hours of continuous operation during power outages. Primary Features

Hybrid Verification: Allows for multi-biometric authentication (Face + Fingerprint + RFID Card).

Advanced Anti-Spoofing: Includes technology to prevent duplicated face registration and detect fake face attempts.

Access Control Interface: Connects directly to electric locks, door sensors, exit buttons, and alarms.

Energy Efficiency: Uses an infrared auto-turning function to save power when the device is not in active use. Official PDF Resources

For detailed technical documentation, users typically refer to the following official ZKTeco guides:

This guide summarizes the key resources and setup instructions for the ZKTeco ProFace X series (often referred to as ), a high-performance facial recognition terminal. Core PDF Resources User Manuals

: Comprehensive guides covering menu operations, user registration, and system settings are available from ZKTeco Brazil (PDF) ZKTeco's official Download Center Installation Guides

: These detail hardware mounting and wiring for power, door locks, and Ethernet. A Quick Start Guide

is often the fastest way to get physical installation completed. Datasheets

: Technical specifications, including recognition speed (< 0.3s) and capacity (up to 50,000 face templates), can be found on the ZKTeco EA product page Initial Setup & Default Credentials Default IP Address

: The factory default IP for many ZKTeco access control devices is 192.168.1.201

: If accessing through a web browser, common default credentials for ZKTeco Web 3.0 interfaces are administrator Admin Password

: For many standalone units, the initial password for unlocking the menu is ZKTeco Hong Kong Key Features & Capabilities X7 Access Control System User Manual V1.2.pdf (The initial password is 1234.) ZKTeco Hong Kong Installation & User Guide - ZKTeco (The default password is 1234.) www.zkteco.com.br

Answer & question – Official website of ZKTeco | Biometric security systems

If the device doesn't have admin, the login account and the password of the web 3.0 are administrator and 123456. ZKTeco Technology Multi-Biometric Verification

: Supports facial recognition, palm recognition, and RFID card/password modes. Anti-Spoofing

: Features advanced algorithms to protect against attacks using photos, videos, or 3D masks. Extreme Durability : Outdoor versions like the ProFace X [P ] are rated (waterproof) and (anti-vandal). Software Compatibility : Fully compatible with ZKBio CVSecurity for access control and ZKBioTime 8.0 for time and attendance management. Zkteco Europe Registration Methods User Mgt. > New User to register faces and palms directly on the touch screen. Via Software : Use the "Search Device" function in ZKBioAccess EP to add the terminal and sync personnel data. Mobile Enrollment

: Users can enroll their faces via a smartphone browser by scanning a QR code generated by the security software. device.report for a door lock, or do you need help resetting a forgotten administrator password X7 Access Control System User Manual V1.2.pdf (The initial password is 1234.) ZKTeco Hong Kong Installation & User Guide - ZKTeco (The default password is 1234.) www.zkteco.com.br

Answer & question – Official website of ZKTeco | Biometric security systems The ZKTeco (and its Pro variants) is a

If the device doesn't have admin, the login account and the password of the web 3.0 are administrator and 123456. ZKTeco Technology 2.8 inch Multi-Biometric Access Control - zkteco.me IP Address: 192.168. 1.201 is default. www.zkteco.me ProFace X - Zkteco.eu

Introduction

In the world of access control and time attendance systems, ZKTeco has been a renowned name for years. The company has been providing innovative solutions for secure and efficient management of access control, time attendance, and video surveillance. One of their flagship products is the XFace Pro, a cutting-edge facial recognition terminal that has revolutionized the way organizations manage access control and time attendance.

The Need for Advanced Access Control

A large corporation, XYZ Inc., with multiple offices and branches across the city, was facing challenges with their traditional access control system. They were using a combination of ID cards and passwords to secure their premises, but the system was proving to be inadequate. ID cards were easily lost, stolen, or duplicated, and passwords were often forgotten or compromised. The company needed a more secure and efficient solution that could accurately identify employees and grant access accordingly.

The Solution: XFace Pro by ZKTeco

After conducting a thorough market research, XYZ Inc. decided to implement the XFace Pro facial recognition terminal by ZKTeco. The XFace Pro is an advanced device that uses artificial intelligence and deep learning algorithms to recognize faces with high accuracy. The terminal is equipped with a 7-inch touchscreen display, 2MP camera, and supports a large database of up to 30,000 faces.

Implementation and Features

The XFace Pro was seamlessly integrated with XYZ Inc.'s existing access control system. The terminal was installed at the entrance of each office and branch, and employees were enrolled in the system by capturing their facial data. The XFace Pro supports multiple verification modes, including facial recognition, ID card, and password.

The XFace Pro offered several advanced features that impressed XYZ Inc., including:

• High Accuracy: The XFace Pro boasts a high accuracy rate of 99.9%, ensuring that only authorized personnel gain access to the premises.
• Fast Recognition: The terminal can recognize faces in less than 1 second, making it an efficient solution for high-traffic areas.
• Anti-Spoofing: The XFace Pro is equipped with advanced anti-spoofing technology that prevents attempts to fool the system using photos or videos.

Benefits and Results

The implementation of XFace Pro by ZKTeco brought numerous benefits to XYZ Inc., including:

• Enhanced Security: The facial recognition system provided an additional layer of security, making it difficult for unauthorized individuals to gain access to the premises.
• Improved Efficiency: The XFace Pro streamlined the access control process, reducing the need for ID cards and passwords.
• Increased Accuracy: The system eliminated errors associated with manual data entry, ensuring accurate time attendance records.

Conclusion

The XFace Pro by ZKTeco has been a game-changer for XYZ Inc., providing a secure, efficient, and accurate access control solution. With its advanced facial recognition technology and robust features, the XFace Pro has set a new standard in access control and time attendance systems.

Let me know if you want me to make any modifications!

Also, I can provide you the following document in pdf:

xface-pro-datasheet.pdf

Would you like me to share?

Let me share this datasheet in text format:

XFace Pro Datasheet

Overview

• 7-inch touchscreen display
• 2MP camera
• Supports up to 30,000 faces
• Multiple verification modes (facial recognition, ID card, password)
• High accuracy rate of 99.9%
• Fast recognition speed (<1 second)

Technical Specifications

• Processor: Dual-core processor
• Memory: 2GB RAM, 8GB storage
• Communication: TCP/IP, RS485, USB
• Power Supply: DC 12V, 2A

Security Features

• Anti-Spoofing: Prevents attempts to fool the system using photos or videos
• Data Encryption: Supports data encryption for secure transmission

Certifications

• IP Rating: IP68
• Certifications: CE, FCC, ISO9001

The ZKTeco XFace Pro is a multi-biometric time attendance and access control terminal designed for secure, contactless employee management. It is often confused with the ProFace X series, which is a high-end line featuring ultra-large capacity and outdoor ratings. Core Features & Specifications

The XFace Pro is optimized for office and commercial environments, offering multiple verification modes:

Authentication Modes: Supports facial recognition, fingerprint scanning, RFID proximity cards, and password entry. System Capacities: Faces: Up to 3,000 templates.

Fingerprints: 4,000 to 5,000 templates (using advanced SilkID technology for wet or rough fingers).

Cards & Logs: 10,000 to 20,000 ID cards and a transaction log of up to 100,000–200,000 records.

Hardware: Features a 2.8-inch TFT touch screen and a built-in 2000mAh backup battery providing roughly 5 hours of operation during power outages.

Connectivity: Integrated TCP/IP, USB-Host, and optional Wi-Fi for flexible networking. Access Control Capabilities

The terminal provides a full access control interface for third-party hardware: Locking: Supports electric lock relay outputs.

Monitoring: Includes door sensor inputs and exit button connections.

Security: Features a tamper switch alarm and auxiliary inputs for sirens or other sensors. Documentation & Resources

For technical setup, you can access official PDF documentation from ZKTeco: ProFace X - ZKTeco

The ZKTeco ProFace X is a high-speed biometric facial recognition terminal offering touch-free authentication with 0.09-second verification and capacity for up to 100,000 faces. It features IP68/IK04 durability, anti-spoofing technology, and operates in extreme temperatures ranging from -30°C to 60°C. Read the full product specifications at ProFace X - ZKTeco

Part 9: Conclusion – Your PDF is Your Blueprint

The ZKTeco xFace Pro is a remarkable piece of biometric engineering, but like any sophisticated tool, it requires a manual to master. Whether you are an installer wiring an electromagnetic lock, an HR manager trying to export payroll data, or an admin troubleshooting a "network failure," the xFace Pro ZKTeco PDF is the single most important file you will download.

Never rely on third-party summary websites for wiring diagrams or error codes. Always source your PDF directly from ZKTeco or an authorized Gold Partner. By keeping a digital copy of the User Manual, Installation Guide, and Datasheet on your phone or laptop, you ensure that your xFace Pro operates at 100% efficiency for years to come.

Part 1: What is the ZKTeco xFace Pro?

Before diving into the PDF documentation, let’s establish what the xFace Pro actually is. The xFace Pro is a cutting-edge biometric time attendance and access control terminal. Unlike traditional fingerprint scanners that require physical contact, the xFace Pro uses dual high-resolution cameras and infrared light sensors to map facial features.

How to get the official PDF/datasheet

• Search ZKTeco’s official website or authorized resellers for the specific XFace Pro model number (e.g., XFace Pro, XFace Pro Plus). Look for “Datasheet” or “User Manual / Specification PDF.”
• Verify model number on the device label or purchase documentation before using a datasheet for procurement or installation.

1. Executive Summary

The ZKTeco XFace Pro series represents a line of advanced facial recognition terminals designed for Time & Attendance and Access Control applications. Leveraging ZKTeco's proprietary facial recognition algorithms and Android-based architecture, the XFace Pro series is positioned as a high-security, high-throughput solution suitable for modern enterprise environments. This report outlines the hardware specifications, core capabilities, software integration, and common applications, with a specific focus on documentation and PDF resources associated with the device.

2. The Installation Guide (Mounting Template)

File Name typically: xFace Pro Installation Guide.pdf Contents:

• Wall mounting distance requirements (Height from floor: ~1.5 meters).
• Screw hole positions (mounting template).
• Wiring the lock relay (NO/COM/NC).
• Connecting the door sensor and exit button.

Verdict from the PDF / Manual Perspective

If you're reading the official PDF (datasheet): High Accuracy : The XFace Pro boasts a

• Strengths highlighted: "Ultra-frequency adaptive facial recognition," "Anti-spoofing algorithm" (prevents photo attacks), "0 lux IR."
• Missing from PDF: Real-world battery backup life (if external), actual outdoor performance (direct sunlight is still problematic), and software learning curve.

Overview

The XFace Pro is a premium touchless facial recognition terminal designed for high-security access control and time attendance management. Powered by ZKTeco’s innovative Visible Light Facial Recognition technology, the XFace Pro offers a frictionless entry experience by recognizing faces instantly without requiring physical contact. Its sleek, modern design and advanced processor make it an ideal solution for corporate offices, data centers, and high-traffic entrances.

7. Installation and Best Practices

• Mounting Height: Should be mounted at an average user eye-level (approx. 1.4m - 1.5m from the ground).
• Lighting: Avoid installing the device facing direct sunlight or bright windows, as infrared interference can affect facial recognition accuracy.
• Network: While Wi-Fi is supported, a hardwired TCP/IP connection is recommended for stable access control operations.