Huawei Atn 910d-a Datasheet Hot!

The Huawei ATN 910D-A is a compact, high-performance 1U fixed-port router designed for the 5G era, specifically targeting base station access and VIP private line services. As part of the ATN series, it provides high-density access with a switching capacity of 800 Gbps to 880 Gbps. Key Technical Specifications Specification Switching Capacity 800 Gbps to 880 Gbps Interface Density 4 x 100GE/50GE, 16 x 25GE/10GE/GE, 8 x 10GE/GE/FE Form Factor 1U (442mm x 220mm x 44.45mm) Weight ~4 kg (base) to 4.3 kg (with AC power) Typical Power Operating Temp -40°C to +65°C (supports outdoor deployment) Core Capabilities

5G Ready: Supports critical next-gen features including SRv6 (Segment Routing over IPv6), EVPN, and FlexE (Flexible Ethernet) for network slicing.

Precision Timing: Equipped with 1588v2 high-precision clock synchronization, essential for mobile packet transport networks.

Reliability: Features hardware redundancy with dual DC/AC 1+1 backup power inputs and a fan assembly with 2+1 backup to ensure continuous operation even during a single fan failure.

Advanced O&M: Supports iFIT (In-situ Flow Information Telemetry) for real-time fault detection and performance monitoring, allowing for automated service provisioning through Huawei iMaster NCE. Application Scenarios ATN 910D-A

is primarily deployed in mobile transport networks to carry 2G, 3G, 4G, and 5G traffic. Its compact 220mm depth allows it to be installed in the same cabinet as wireless Baseband Units (BBUs), making it ideal for high-density metropolitan area network (MAN) access and enterprise private lines. ATN910C - Huawei Carrier Huawei Atn 910d-a Datasheet

Huawei ATN 910D-A Datasheet: A Deep Dive into the Next-Generation Aggregation Router

Performance & Packet Processing

| Metric | Value | |--------|-------| | IPv4 forwarding rate | 6 Mpps (million packets per second) | | IPv4 routing table | 12K routes | | MAC table | 8K entries | | MPLS labels | 4K | | VLANs | 1K | | Jumbo frame | Up to 9216 bytes |

6. Software & Management

The device runs on Huawei VRP8 (Versatile Routing Platform version 8) – the same OS used across NE, CX, and AR series routers.

• CLI: Industry-standard (Cisco-like) hierarchical CLI.
• Netconf/YANG: Full model-driven programmability for automation (Ansible, Python).
• SNMP: v1, v2c, v3 with standard MIBs and Huawei private MIBs.
• Web UI: Embedded Web manager for basic setup (HTTPS).

The device is also compatible with Huawei iMaster NCE (formerly Agile Controller) for SDN-based zero-touch provisioning (ZTP) and closed-loop SLA assurance.

8. Ordering Information & Part Numbers

When procuring, use the following key codes (specific to region – verify with local Huawei partner):

| Part Number | Description | | :--- | :--- | | ATN910D-A | Chassis base unit (no PSU, no optics) | | CR5PWRAC01 | AC power module (100-240V, 50/60Hz) | | CR5PWRDC01 | DC power module (-48V) | | OSX010000 | 10GE SFP+ (LR, SM, 10km) | | eSFP-GE-SX-MM850 | 1GE SFP (MM, 550m) | | V150R022C00SPC | Current VRP8 software release (as of 2025) | The Huawei ATN 910D-A is a compact, high-performance

Note: The ATN 910D-A does NOT require a separate fan unit – it is passively cooled within the 1U chassis, reducing noise and failure points.

Environmental & Compliance (Why it’s “hardened”)

The datasheet highlights:

• EMC: Class A, meets FCC, ICES, VCCI, CISPR22
• Safety: IEC 60950-1, EN 60950-1
• ETSI: 300 019 (storage, transport, in-use vibration)
• Ingress protection: Designed for IP30 (when mounted in IP54 cabinet for outdoor)

⚠️ Note: The ATN 910D-A itself is not IP67-rated – it’s a “protected” router for indoor or weatherproof enclosures, not direct rain/splashes.

Example checklist for a single‑site deployment

1. Verify ordered model and interface card mix.
2. Confirm optics and fiber type; test end‑to‑end fiber links.
3. Install in 1U slot; secure rails and ground.
4. Connect redundant power (AC or DC) and verify indicators.
5. Connect management port to OOB network; change default credentials.
6. Load tested firmware version; enable SSH, disable insecure services.
7. Configure interfaces, VLANs, routing (OSPF/BGP) and clock sync settings.
8. Enable protection (BFD + FRR) for critical links; run failover tests.
9. Integrate with NMS/iMaster and schedule monitoring/alarms.
10. Document configuration backup and recovery procedure.

If you want, I can:

• produce a one‑page rack‑mount/power/cabling diagram for an example site, or
• extract exact port counts, power draw and optics part numbers from the official quick installation/datasheet PDFs. Which do you prefer?

The Huawei ATN 910D-A is a compact, high-capacity 1U fixed-box router designed specifically for 5G-ready mobile backhaul (base station access) and high-value VIP private line services. As part of Huawei’s ATN multi-service access router series, it offers a significant leap in switching capacity over previous generations, reaching up to 880 Gbps. Key Technical Specifications CLI: Industry-standard (Cisco-like) hierarchical CLI

The ATN 910D-A is engineered for high density and modern protocol support in a small footprint. Specification Details Switching Capacity 800 Gbps to 880 Gbps Form Factor 1U height, 220mm depth (Compact design) Port Density 4 x 100GE/50GE + 16 x 25GE/10GE/GE + 8 x 10GE/GE/FE Operating Temperature -40°C to +65°C (Industry-level design for outdoor use) Power Supply Dual DC/AC, 1+1 redundancy Typical Power Consumption Weight Approximately 4.0 kg to 4.3 kg Core Capabilities & Features

5G-Ready Protocols: Fully supports next-generation networking protocols including SRv6 (Segment Routing over IPv6), EVPN, and FlexE (Flexible Ethernet) for network slicing.

High Precision Timing: Incorporates 1588v2 high-precision clock synchronization, which is critical for the stringent timing requirements of 5G networks.

Advanced OAM & Visibility: Features iFIT (In-situ Flow Information Telemetry) for real-time performance monitoring and millisecond-level fault detection.

Deployment Versatility: Its compact 220mm depth allows it to be installed in the same cabinet as wireless Baseband Units (BBUs), facilitating large-scale 5G deployment in constrained spaces.

Proven Performance: Independent testing has verified its ability to maintain line-rate throughput across 10GE, 25GE, and 100GE ports with varied packet sizes. Typical Application Scenarios ATN 910D-C Universal Service Router Datasheet

AC Power (Optional PSU Module)

• Input: 100V–240V, 50/60Hz.
• Max current: 1.5A.
• Efficiency: >87% (80 PLUS Bronze equivalent).

11. Standards and Certifications

The device holds international compliance marks for global deployment.

• EMC: CISPR 22 Class A, FCC Part 15 Class A, EN 55022/55032.
• Safety: IEC 60950-1, IEC 62368-1, UL/CSA, CE, CB.
• Environmental: RoHS, WEEE, REACH.
• Telecom: NEBS Level 3 (GR-1089-CORE, GR-63-CORE) – optional configuration.